7.6.1
Errors during the restore process
Alternately with
or
or
NOTE:
During the restore process, all settings and parameters are written
from the program module to the basic unit's onboard memory. In
the process, it is possible that previous program sequences, pa-
rameters and settings in the onboard memory will be overwritten!
7.6.2
Reset
nfo
> 1 s
NOTE:
For meaning of the error and diagnostic codes, see chapter 'Error
code list with operation via internal LED" at page 39.
Operation, indication, diagnostics
Display shows alternately rSt and Er1, Er2 or Er3.
For meaning of a possible cause, see chapter 'Error code list with operation via internal LED" at page 39.
nfo
When pressing
for 1...3 seconds, OFF is displayed.
When the button is released, the basic unit is reset.
45
GB
Tab. AC
Tab. AD
20051011