Daytime Running Lights (Drls); High Beam Headlights; Automatic Headlights; Flash-To-Pass - Alfa Romeo Giulia 2024 Owner's Manual

D R L (DRL
AYTIME UNNING IGHTS
The Daytime Running Lights (DRLs) (low intensity) come
on automatically whenever the ignition is placed in the
ON/RUN position, and the headlight switch is turned to
the position, and the dusk sensor detects sufficient
external light.
On some vehicles, the Daytime Running Lights may
deactivate, or reduce intensity, on one side of the
vehicle (when a turn signal is activated on that side), or
on both sides of the vehicle (when the hazard warning
lights are activated).
The DRL can be activated/deactivated from the radio
system, by selecting the following functions in
sequence on the main MENU:
1. Settings
2. Lights
3. Daytime Running Lights
NOTE:
The Daytime Running Lights cannot be deactivated in
Canadian markets.
H B H
IGH EAM EADLIGHTS
Push the multifunction lever towards the instrument
panel to switch the headlights to high beams. The
headlight switch must be turned to the
(on) position.
The High Beam Indicator on the instrument panel
will illuminate when the high beams are on.
)
S
Pulling the multifunction lever back will turn the low
beams on.
A H
UTOMATIC EADLIGHTS
This system automatically turns the headlights on or off
according to ambient light levels. To turn the system on,
rotate the headlight switch to the
NOTE:
The function can only operate with the ignition placed
in the ON/RUN position.
To turn the automatic headlights off, turn the headlight
(AUTO) or
switch out of the
F -T -P
LASH O ASS
You can signal another vehicle with your headlights by
lightly pulling the multifunction lever toward you. This
will cause the high beam headlights to turn on, and
remain on, until the lever is released.
Multifunction Lever
(AUTO) position.
(AUTO) position.
A H B H
UTOMATIC IGH EAM EADLIGHTS
I E
F QUIPPED
The Automatic High Beam Headlights system provides
increased forward lighting at night by automating high
beam control through the use of a camera mounted on
the windshield. This camera detects vehicle specific
light and automatically switches from high beams to
low beams until the approaching vehicle is out of view.
This function is enabled with the radio system, and can
only be activated with the light switch turned to
(AUTO).
If the high beam headlights are on, the blue
icon/indicator light will illuminate in the instrument
panel.
When the speed is higher than 25 mph (40 km/h) and
the function is active, the lights will turn off if the
multifunction lever is pushed again.
When the speed is lower than 15 mph (25 km/h) and
the function is active, the function switches the high
beam headlights off.
If the high beam headlights are operated quickly again
(pushing the multifunction lever towards the instrument
panel), the icon/indicator light will illuminate in the
instrument panel, and the high beam headlights will
turn on constantly until the speed exceeds 25 mph
(40 km/h).
When the speed of 25 mph (40 km/h) is exceeded
again, the automatic functioning is reactivated.
If the multifunction lever is pushed again with the
Automatic High Beam Headlights activated, the
Automatic High Beam Headlights function deactivates.
To deactivate the automatic headlight function, rotate
the headlight switch to the position.
—
47