Blue Indicator Lights; Red Symbols - Alfa Romeo Giulia 2024 Owner's Manual

Hide thumbs Also See for Giulia 2024:
Table of Contents

Advertisement

Parking/Headlights On Indicator Light
This indicator will illuminate when the
parking lights or headlights are turned on.
Right Turn Signal Indicator Light
The instrument cluster directional arrow will
flash independently for the right turn signal
as selected, as well as the exterior turn
signal lamp(s) (front and rear) as selected
when the multifunction lever is moved up
(right). This directional arrow will flash in conjunction
with the left directional arrow when the hazard warning
light button is pushed.
B
I
L
LUE
NDICATOR
IGHTS
High Beam Indicator Light — If Equipped
This indicator shows that the high beam
headlights are on. Push the multifunction
control lever away from you to switch the
headlights to high beam. Push the lever a
second time to switch the headlights back
to low beam. Pull the lever toward you for a temporary
high beam on, "flash to pass" scenario.
R
S
ED
YMBOLS
Alfa Steering Torque (AST) Failure
The switching on of the telltale signals a
failure in the automatic steering correction
system.
Contact an authorized dealer to have the
system checked.
78
Alternator Failure
The switching on of the telltale with engine
on corresponds to an alternator failure.
Contact an authorized dealer as soon as
possible.
Automatic Transmission Failure
The telltale turns on, together with a buzzer
warning, to indicate that the automatic
transmission is faulty.
Contact an authorized dealer as soon as
possible.
CAUTION!
Driving the vehicle with this symbol on may severely
damage the gearbox, with resulting breakage. The oil may
also overheat: contact with hot engine or with exhaust
components at high temperature could cause fires.
Brake Disc Temperature
When the symbol turns on, it indicates an
excessive temperature of the brake discs.
Let the braking system cool down by
reducing the speed.
Driver Attention Assist (DAA) System
Activation — If Equipped
The DAA system detects indications that the
driver is feeling fatigued and illuminates this
warning that the driver should pull over and
take a break.
Stop to pause while driving, pulling the car
over in safe conditions.
Door Open
The telltale turns on when one or more
doors are not completely shut. An acoustic
signal is activated with the doors open and
the car moving.
Close the doors properly.
Power Steering Failure
If the telltale remains on, you may not have
steering assistance and the effort required
to operate the steering wheel may be
increased; steering is, however, possible.
NOTE:
After the battery is disconnected, the steering wheel
must be re-initialized. The Power Steering Failure light
on the instrument panel will illuminate to indicate this.
To carry out this procedure, simply turn the steering
wheel all the way from one end to the other, and then
turn it back to the central position.
Contact an authorized dealer as soon as possible.
Electronic Throttle Control (ETC) Warning
Light
This warning light, along with the related
message, signals a failure in the ETC.
If a failure is detected, the warning light
turns on while the engine is running.
Place the gear selector in the PARK (P)
position and the ignition in the off position: the warning
light should switch off. If the warning light stays on with
engine running, the vehicle can still be driven.
If the warning light flashes with the engine running,
immediate intervention is required. A loss of performance,
irregular/high idling speed or engine stopping might take
place and the vehicle may need to be towed.
Contact an authorized dealer as soon as possible to
have the failure eliminated.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stelvio 2024

Table of Contents