Operation; Indications On The Display - Alfa Romeo Giulia 2024 Owner's Manual

Suspension Conditions
The following operations will suspend HAS:
□
Steer manually
□
Press the brake pedal
□
Disable the ACC device
□
Activate the turn signals
□
Push the ACC activation setting button for two
seconds to activate Cruise Control
□
Place the gear selector in PARK, REVERSE, or NEUTRAL
Reactivating the ACC system will reactivate HAS
page 102.
Automatic Deactivation
The system can be deactivated in any of the following
situations:
□
If there are narrow bends
□
When hands are removed from the steering wheel
□
If the left or right turn signal is activated
□
If the driver intentionally changes lanes without
using the turn signal
□
If the driver's seat belt is released
□
If the gear selector is placed in DRIVE
□
If the "Active Braking" function is activated
page 194
□
If the vehicle exits the highway
□
If the lane markings are not detected by the camera
□
If the ACC device is deactivated
□
If the vehicle speed exceeds 90 mph (145 km/h)
NOTE:
□
When HAS is turned off, the symbol on the display
turns red and then grey.
□
Hands on the steering wheel are detected by a
capacitive sensor within the steering wheel.
When the automatic suspension conditions are over,
HAS will be automatically reactivated.
O
PERATION
HAS only operates when the driver's hands are on the
steering wheel.
If the system detects that the driver's hands have been
removed from the steering wheel, the system will alert
the driver to place their hands back on the steering
wheel page 110.
If the vehicle crosses the lane boundary, the steering
wheel will vibrate and the dedicated screen will appear
in the instrument cluster display.
NOTE:
HAS may take up to five seconds to turn on once all
conditions are met. During this time, a grey indicator
light will appear on the instrument cluster display and
the system will automatically activate as soon as all of
the conditions are met with no intervention from the
driver.
The following conditions must be met before HAS turns
on:
□
HAS must be enabled by pushing the button on the
steering wheel
□
The vehicle must be on a highway
□
ACC must be activated
□
The right and left lane boundaries must be visible
□
The vehicle speed must be between 0 and 90 mph
(0 and 145 km/h)
□
The camera, radar, and radio system must be
functioning properly
□
The road lane width must be between 8.5 ft and
13.7 ft (2.6 m and 4.2 m)
□
The turn signals must not be activated
□
HAS must be functioning properly
Other operating limits:
□
If the speed of ACC can be set to a higher value (top
speed 110 mph (180 km/h), HAS is only available
as long as the vehicle speed is equal to or less than
90 mph (145 km/h).
□
When the ACC speed is reduced and the vehicle
speed is less than 90 mph (145 km/h), the system
will automatically reactivate.
□
If the ACC speed is set to 90 mph (145 km/h),
traveling downhill may increase the vehicle speed.
HAS will deactivate until the speed returns to
90 mph (145 km/h).
I O T D
NDICATIONS N HE ISPLAY
HAS status can always be viewed in the instrument
cluster display.
The system status is indicated by the color of the
symbol on the display.
HAS uses sensors in the steering wheel to detect if the
driver's hands are on it.
If the driver's hands are not on the steering wheel, a
series of warnings will appear in the instrument cluster
display to alert the driver to reposition their hands on
the steering wheel. An acoustic signal will also sound.
After a period of time, HAS will disable if the driver's
hands do not return to the steering wheel.
When the system does not detect hands on the
steering wheel, it will warn the driver by displaying a
dedicated screen on the instrument cluster display.
109