Alfa Romeo Giulia 2024 Owner's Manual page 59

Hide thumbs Also See for Giulia 2024:
Table of Contents

Advertisement

SYNC Button
Push the SYNC button (indicator illuminated) to sync
the passenger side air temperature with the driver side
air temperature.
This function makes temperature regulation easier
when the driver is traveling alone.
Turn the passenger Temperature Adjustment Knob or
push the passenger side Air Distribution Selection
Button to change the passenger side air temperature
and return to separate air temperature management.
Blower Speed
Turn the Blower Speed Knob to increase or decrease
the blower speed. The speed is displayed with lighted
indicators in the radio system display.
Maximum fan speed = all indicators illuminated on
the radio system display
Minimum fan speed = one indicator illuminated on
the radio system display
The fan can be turned off by rotating the Blower Speed
Knob counterclockwise to the off position (all segments
on the radio system display are turned off).
NOTE:
To restore automatic control of the fan speed, push the
AUTO button.
Air Distribution Selection
Push the Air Distribution Selection button on the
faceplate to change the mode of air distribution.
NOTE:
In AUTO mode, the Climate Controls automatically
manage the air distribution. When set manually, the
respective symbols on the radio system indicate the air
distribution setting.
Panel Mode
Air comes from the outlets in the
instrument panel to ventilate the chest and
face. Each of these outlets can be
individually adjusted to direct the flow of air.
The air vanes of the center outlets and
outboard outlets can be moved up and down or side to
side to regulate airflow direction. There is a shut-off
wheel located below the air vanes to shut off or adjust
the amount of airflow from these outlets.
Bi-Level Mode
Air comes from the instrument panel outlets
and floor outlets. A slight amount of air is
directed through the defrost and side
window demister outlets.
NOTE:
Bi-Level mode is designed under comfort conditions to
provide cooler air out of the panel outlets and warmer
air from the floor outlets.
Floor Mode
Air comes from the floor outlets. A slight
amount of air is directed through the
defrost and side window demister outlets.
This setting heats the passenger
compartment the quickest.
Mix Mode
Air is directed through the floor, defrost, and
side window demister outlets. This setting
works best in cold or snowy conditions that
require extra heat to the windshield. This
setting is good for maintaining comfort
while reducing moisture on the windshield.
Front Defrost And Panel Mode
Air flow is distributed between the windshield
demisting/defrosting vents and side/central
dashboard vents. This setting allows air to
flow to the windshield on sunny days.
Front Defrost And Bi-Level Mode
Air flow is distributed to all vents.
Switching The Climate Control System On/Off
To Turn Off The Climate Control System
Rotate the Air Speed Adjustment Knob completely
counterclockwise to turn off the Climate Control
system.
When the air conditioner is off:
Air recirculation is on
The A/C compressor is off
The fan is off
The heated rear window can be activated/
deactivated
NOTE:
The climate control system stores the previously set
temperatures and resumes operation when any button
on the system is pushed.
To Turn On The Climate Control System
To switch the climate control system on in automatic
mode, push the AUTO button.
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stelvio 2024

Table of Contents