Advertisement
SAFETY INSTRUCTIONS
WARNING
Printing
Do not use the printer when smoke or a bad odor is
coming from the printer. Otherwise it may cause
fire or electric shocks or problems with correct
operation. Immediately turn off the power,
disconnect the power cord, and contact the place
of purchase or a qualified technician.
Keep your finger or any body part away from the
rotating fan. Otherwise it will be caught up, which
results in injuries.
Turn off the power when you approach the fan.
CAUTION
Environmental requirements
Use the printer in a place which is adequately
ventilated. A slight odor is generated when the
printed articles are being fixed by heat.
Installation
The printer machine weighs 690 kg (1521 lb).
Transporting and setting up of the printer should be
held in the proper way. Otherwise, the printer may
topple over and cause injury.
4
Unplug the printer and contact the dealer where
you purchased the printer or a trained technician if
the printer topples over. If you continue to use it, it
may result in fire or electric shocks or poor printing
quality.
Do not set up the printer in a place where it will be
affected by vibration. Otherwise the printing quality
may be degraded or the printer may topple over,
which causes injury or results in failure of the
printer.
Do not connect the power cord until installation is
complete. The printer may operate if the power is
turned on by mistake, which could result in injury.
Do not climb onto the printer or place heavy
objects on top of it. You may get injured if it
becomes unbalanced and tips over.
Printing
This printer should only be used by operators who
are appropriately trained in its safe operation.
Ensure there is adequate space left in front of the
printer and avoid placing any objects. Otherwise
your hand may get caught between the platen and
an object, which may result in injury.
Do not handle the platen while printing. If your
hand gets caught between the platen or the T-shirt
tray and the covers, it may be injured.
Do not put your hands inside the covers while the
printer's power is turned on. Otherwise your hands
may touch against moving parts and this may
result in injury.
Advertisement
