Advertisement
Connection to a PC
If [Manual setting] is selected:
3) Press
to select the position to be changed.
4) Press
to set the value.
5) When the
button is pressed, the selected value is
accepted, and the display screen goes to the [IP Address],
[Subnet Mask] and [Default Gateway] in sequence.
The display screen shown here has been taken as
an example.
TIPS
IP Address Set
IP Address
1 9 2 . 1 6 8 . 0 0 0 . 0 0 1
OK to Subnet Mask Screen
IP Address Set
Default Gateway
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
Set OK
38
IP Address Set
Subnet Mask
2 5 5 . 2 5 5 . 2 5 5 . 0 0 0
OK to Gateway Screen
Installing the network print driver
1) Connect the printer and PC to a network using LAN cables
and turn the printer power ON.
2) [Settings] -> [Device] -> [Devices and Printers]
3) Click on [Add a printer].
Advertisement
