Advertisement
Setup of the printer
8
Mounting the wiper
1.
-> [Maintenance] -> [Maintenance Part
Clean/Replace] -> [Replace maintenance unit parts] ->
2.
Keyhole
Keyhole
Unlock the upper left-hand-side cover and top cover and open
them.
32
3.
Hold the latch of the wiper on the left-hand side and insert the
wiper into the maintenance unit from the right-hand side.
Be sure to connect the wiper in the right
direction.
IMPORTANT
Push the wiper in and make sure that the left
and right protrusions are firmly fitted.
There may be some ink marks from the finished
product inspection.
TIPS
Right-hand-
side cover
Left-hand-
side cover
X1123
Advertisement
