Advertisement
5
Turning on the power
Power switch
Power cord insertion port
Insert the power cord into the power cord insertion port and
plug the cord into an electrical outlet. Turn on the printer power
switch with each door and cover closed.
Make sure that the printer's earth terminal is
IMPORTANT
properly grounded.
6
Adjusting the levelness
1.
Press
to move the platen to the front.
2.
Apply a level to the center of the platen.
3.
Adjust the level by rotating the lower nuts that secure the legs
(4 points).
Adjust so that the adjusters protrude 4.9 in. (125
IMPORTANT
mm) or less from the bottom of the frame.
4.9 in.
(125 mm)
or less
29
Advertisement
