Advertisement
WARNING
Basic precautions
This printer should only be used by operators who
are appropriately trained in its safe operation.
The printer is not suitable for use in places where
children are present.
To prevent accidents and problems, do not modify
the machine yourself. Brother will not be held
responsible for any accidents or problems resulting
from modifications made to the machine.
Do not handle the power cord with wet hands.
Otherwise, it may cause electric shocks.
Installation
Do not set up the printer in a dusty environment. If
dust collects inside the printer, it may cause fire or
electric shocks or problems with correct operation.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Do not bend the cords excessively or fasten them
too hard with staples or anything similar to secure
cords. Otherwise it may cause fire or electric
shocks.
Do not connect power cords on the floor near the
printer.
Water dripping from the printer may cause fire,
electric shocks, or problems.
Printing
If a foreign object gets inside the printer,
immediately turn off the power, disconnect the
power cord, and contact the place of purchase or a
qualified technician. If you continue to use the
printer while there is a foreign object inside, it may
result in fire or electric shocks or problems with
correct operation.
Do not allow the printer to come into contact with
liquids. Otherwise it may cause fire or electric
shocks or problems with correct operation.
If any liquid gets inside the printer, immediately
turn off the power, disconnect the power cord, and
contact the place of purchase or a qualified
technician.
3
Advertisement
