Removing The Idsdm Card - Dell PowerEdge FC630 Owner's Manual
Hide thumbs
Also See for PowerEdge FC630:
- Getting started (2 pages) ,
- Owner's manual (143 pages) ,
- Getting started with your system (2 pages)
Table of Contents
Advertisement
Removing the IDSDM card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1.
Ensure that you read the
2.
Keep the #2 Phillips screwdriver ready.
3.
Follow the procedure listed in
4.
If installed, remove the internal USB key.
5.
If installed, remove the SD card(s).
Steps
1.
Remove the two screws securing the IDSDM card to the system board.
2.
Remove the SD card slot bracket.
CAUTION: To prevent damage to the IDSDM card, you must hold the card only by its edges.
3.
Lift the card up and away from the system.
Figure 15. Removing and installing the IDSDM card
1.
IDSDM card
Safety
instructions.
Before working inside your
Get other manuals https://www.bkmanuals.com
system.
2.
screw (2)
57
Advertisement
Table of Contents
Troubleshooting
