Re-Enabling The Tpm For Bitlocker Users; Re-Enabling The Tpm For Txt Users - Dell PowerEdge FC630 Owner's Manual

3. Press the plastic bolt until the bolt snaps into place.
Figure 36. Installing the TPM
1. TPM
3. slot on the TPM connector
5. slot on the system board

Re-enabling the TPM for BitLocker users

Initialize the TPM.
For more information on initializing the TPM, see http://technet.microsoft.com/en-us/library/
cc753140.aspx.
The TPM Status changes to Enabled, Activated.

Re-enabling the TPM for TXT users

1. While booting your system, press <F2> to enter System Setup.
2. In the System Setup Main Menu, click System BIOS → System Security Settings.
3. In the TPM Security option, select On with Pre-boot Measurements.
4. In the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Enter System Setup again.
8. In the System Setup Main Menu, click System BIOS → System Security Settings.
9. In the Intel TXT option, select On.
Get other manuals https://www.bkmanuals.com
2. TPM connector
4. plastic bolt
95