Installing A 1.8 Inch Ssd In A 1.8 Inch Ssd Carrier; Removing The Hard-Drive/Ssd Cage - Dell PowerEdge FC630 Owner's Manual

Installing a 1.8 inch SSD in a 1.8 inch SSD carrier

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
NOTE: You must remove the hard drive/SSD from a hard-drive/SSD carrier to replace a faulty hard
drive/SSD from a hard-drive/SSD carrier.
1. Ensure that you read the
2. Remove a 1.8 inch SSD from a 1.8 inch SSD carrier. See
carrier .
Steps
Insert the SSD into the SSD carrier with the connector end of the SSD toward the back. When aligned
correctly, the back of the SSD is flush with the back of the SSD carrier.

Removing the hard-drive/SSD cage

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Keep the #1 Phillips screwdriver ready.
3. Follow the procedure listed in
4. Remove the hard drive(s)/SSD(s).
5. Remove the hard-drive/SSD backplane. See
Steps
1. Remove the two screws securing the hard-drive/SSD cage to the chassis.
2. Holding the hard-drive/SSD cage by its edges, slide it toward the front of the system and remove it
from the sled.
Safety instructions.
Safety instructions.
Before working inside your
Removing the hard-drive/SSD
Get other manuals https://www.bkmanuals.com
Removing a 1.8 inch SSD from a 1.8 inch SSD
system.
backplane.
77