Time Stamping Snapshots; Setting The Camera's Clock - Rollei Powerflex 240 HD User Manual

Table of Contents

Advertisement

Time Stamping Snapshots (Date Stamp)
Procedure
[SET]
MENU
You can configure the camera to stamp the recording date only, or date and time in
the lower right corner of each snapshot.
• Once date and time information is stamped into a snapshot, it cannot be edited or
deleted.
Example: July, 10, 2012, 1:25 p.m.
Date
Date&Time
Off
• Even if you do not stamp the date and/or time with Date Stamp, you can do so later
using the DPOF function or some printing application (page 74).
• Digital zoom is disabled while time stamping is turned on.
• Time stamping is disabled when certain Scene Mode scenes are being used.
Setting the Camera's Clock (Adjust)
Procedure
[SET]
MENU
[ ] [ ]
[ ] [ ]
[
] (Movie)
When the date and time settings are what you want, press [SET] to apply them.
• You can specify a date from 2001 to 2049.
• Be sure to select your Home City (page 74) before setting the time and date. If you
set the time and date while the wrong city is selected for your Home City, the times
and dates of all of the World Time cities (page 85) will be wrong.
Set Up Tab
Date Stamp
2012/7/10
2012/7/10 1:25pm
No stamping of date and/or time
Set Up Tab
Adjust
Change the setting at the cursor location
Move the cursor between settings
Toggles between 12-hour and 24-hour format
86

Advertisement

Table of Contents
loading

Table of Contents