Shooting Without Disturbing Others - Rollei Powerflex 240 HD User Manual

Shooting without Disturbing Others (Silent Mode)
The Silent mode automatically disables flash, mutes operation tones, and configures
other settings to avoid disturbing others around you. It comes in handy when shooting
in a museum or other areas where flash photograph is prohibited.
1.
In the REC mode, press [SET].
2.
Use [ ] and [ ] to select the seventh Control Panel option from the top
(Silent Mode).
3.
Use [ ] and [ ] to select "On" and then press [SET].
This enters the Silent mode, which is indicated by
screen. The following shows the camera setup in the Silent mode.
Flash
Self-timer
Sounds
• As shown in the example to the right, Flash and Self-timer are not included in
the control panel. This means that these settings cannot be changed from the
Control Panel.
• See the following for details.
– Flash (page 35)
– Self-timer (page 37)
– Sounds (page 83)
• Entering the Silent mode in the REC mode will also enter the Silent mode in the
PLAY mode automatically (page 67).
Off
Off
Off
38
(Silent) on the monitor