Advanced Settings; Using On-Screen Menus - Rollei Powerflex 240 HD User Manual

Advanced Settings

The following are menu operations you can use to configure various camera settings.
• REC mode menu contents and operations are different from those in the PLAY
mode. This section explains operations using the REC menu screen. See page 64
for information about PLAY menu screen operations.

Using On-screen Menus

• Example REC Menu Screen Operation
1.
In the REC mode, press [SET].
2.
Use [ ] and [ ] to select the second Control Panel
option from the bottom (MENU) and then press
[SET] (page 30).
This will display the REC menu screen.
3.
Use [ ] and [ ] to select the tab where the menu
item you want to configure is located.
4.
Use [ ] and [ ] to select the menu item you
want, and then press [ ].
5.
Use [ ] and [ ] to change the setting of the
selected menu item.
6.
After the setting is the way you want, press
[SET] to apply the setting and return to the
viewfinder screen.
• Pressing [ ] instead of [SET] applies the
selected setting and returns to the menu item
selection.
• To configure settings on another tab after
pressing [ ] to return to the menu item selection,
use [ ] or [
up to the tabs, and then use [ ] and [ ] to select
the tab you want.
] (Delete) to move the highlighting
47
[ ] [ ] [ ] [ ]
[SET]
Example:
When " Quality" is
selected on the "Quality"
tab
Tabs
Quality Setup
REC
Fine
Quality
EV Compensation
Normal
White Balance
ISO
Color Mode
Settings
Selected menu item