Table of Contents
Advertisement
2.
With your computer
turned on, connect the
camera to it.
The LED Lamp should light
red, indicating that charging
has started.
The LED Lamp will go out
when charging is complete.
It takes about 130 minutes to
achieve a full charge.
Charging may take longer
depending on charging
conditions.
LED Lamp Operation
Lamp Status
Lit Red
Flashing Red
Off
3.
After charging is complete, disconnect the USB cable from the camera
and then from the computer.
USB port
Making sure that the
connector is towards the lens side, connect the
cable to the camera.
Description
Charging
Abnormal ambient temperature,
charging taking abnormally long,
or battery problem (page 98)
Charging complete
15
USB cable
(included with camera)
Large connector
Small
connector
mark on the USB cable
LED Lamp
[USB/AV]
port
Advertisement
Table of Contents
