Optical Zoom And Digital Zoom Switch Point - Rollei Powerflex 240 HD User Manual

Optical Zoom and Digital Zoom Switch Point

If you hold the zoom controller towards
when the optical zoom factor reaches its maximum. Momentarily releasing the zoom
controller and then holding it again towards
which you can use to set an even higher zoom factor.
• During zoom, a zoom bar on the monitor screen shows the current zoom setting.
Undeteriorated image
quality range
1X
Optical/digital zoom switch point
*
24X optical zoom point
• The image deterioration point
depends on the image size (page
32). The smaller the image size,
the higher the zoom factor you
can use before reaching the
image deterioration point.
• Though digital zoom generally
causes a deterioration of image
quality, some digital zoom
without image deterioration is
possible with image sizes of
"10M" and smaller. The range in
which you can use digital zoom
without image deterioration is
indicated on the display. The
deterioration point depends on
the image size.
(Telephoto), the zoom operation will stop
Focusing range
(Displayed for Auto Focus, Macro Focus, and Manual
Focus.)
Zoom bar
Deteriorated image
24X to 172.8X
Image deterioration
Image
Size
16M
3:2
16:9
10M
5M
3M
VGA
40
(Telephoto) will switch to digital zoom,
quality range
24X to 382.6X
Zoom pointer (Indicates current zoom.)
Maximum
Zoom Factor
24.0X
24.0X
24.0X
121.2X
172.8X
215.5X
382.6X
Undeteriorated
zoom limit
24.0X
24.0X
24.0X
30.2X
43.2X
54.0X
172.8X