Table of Contents
Advertisement
Adding Audio to a Snapshot (Voice Memo)
Procedure
[
] (PLAY)
Snapshot Screen
Voice Memo
You can add audio to a snapshot after you shoot it.
You can re-record a snapshot's audio whenever you
want. You can record up to about 30 seconds of audio
for a single snapshot.
1.
Press [SET] to start audio recording.
2.
Press [SET] again to stop audio recording.
• Take care that you do not block the camera's microphone
with your fingers while recording.
• Good recording results are not possible when the camera is
too far away from what you are trying to record.
• Your camera supports the following audio data formats.
– Audio Format: WAV extension
• You cannot add audio to an image that is protected.
• To delete audio, perform the following operation:
Voice Memo
IMPORTANT!
• Note that you cannot restore the original audio of an Audio Snapshot after you
delete or re-record it.
To play snapshot audio
1.
In the PLAY mode, use [ ] and [ ] to scroll through the images until
the Audio Snapshot you want is displayed.
An audio snapshot is one that has a
2.
Press [
] (Movie) to start playback.
[SET]
Delete
[SET]
70
MENU
Remaining recording time
[
] (Delete).
icon.
PLAY Tab
Microphone
Advertisement
Table of Contents
