Table of Contents
Advertisement
To shoot a snapshot
1.
Press
(REC) to turn on the camera.
[
]
The camera will enter the REC mode.
Make sure
Snapshot mode icon
Remaining Snapshot Memory
Capacity
2.
Point the camera
at the subject.
You can zoom the
image, if you want.
3.
Half-press the shutter button to
focus the image.
When focus is complete, the camera
will beep, the LED Lamp will light
green, and the focus frame will turn
green.
Half-press
Beep, beep (Image is in focus.)
is on the display. If it isn't, see page 45.
Zoom controller
Press lightly
until the
button stops.
Wide Angle
LED Lamp
When you half-press the shutter button, the
camera automatically adjusts exposure and
focuses on the subject it is currently pointed
at. Mastering how much pressure is required
for a half-press and a full-press of the shutter
button is an important technique for good-
looking images.
• The focus frame in the screen shots
included in this manual is shown at
Note that you can change the form of the
focus frame, if you want (page 51).
24
Monitor screen
Shutter button
[
] (REC)
Telephoto
Focus frame
.
Advertisement
Table of Contents
