Pitney Bowes DP40S Operator's Manual page 13

The Control
Panel
SV62531 Rev. B
Using the Menus
Menu details are given in "Appendix B — Menu System" for reference.
The Enter, Up-arrow, Down-arrow and Back buttons are used to move
through the printer menus. You can adjust settings (e.g. set the paper
size for Tray 1) or view information (e.g. how much is left of a selected
consumable).
Many of these menu settings can be, and often are, overridden by settings
in the print drivers. However, several of the driver settings can be left at
"printer Setting," which will then default to the settings entered in the front
panel menus.
The steps involved in using the menus are typically as follows:
1. Ensure that the display panel indicates that the printer is ready to print.
2. Enter User menu mode by pressing either the Enter button or the Up-
arrow or Down-arrow button and press the latter two repeatedly until the
desired menu is highlighted in the displayed list.
3. Press the Enter button to select this menu.
4. Press the Up-arrow or Down-arrow buttons repeatedly until the desired
item is highlighted.
5. Press the Enter button to select this item.
6. Press the Up-arrow or Down-arrow buttons repeatedly until the desired
Value is highlighted.
7. Press the Enter button to select this Value. (If you are setting a
parameter, ensure that an asterisk (*) appears beside the selected
parameter Value.)
8. Press the Online button to exit menu mode and return to the ready to
print status.
Refer to "Chapter 2 - Getting Started" and to "Appendix B - Menu System"
for examples of using the menus.
1 • Introduction
1-7