Table of Contents
Advertisement
NLHome Connect
aThe controls are
blocked.
aThe child lock also remains in standby
of the device and active in the event of a
power failure.
14.2 Deactivate child lock
Required:To deactivate the child lock,
the appliance must be switched on.
▶
Approx. 3 s up 3 secondsto press.
In order not to cancel the running
programme, the program selector
must be set to the initial
programme.
1 5 HomeConnect
D his device is suitable for network
know. Connect your appliance to a
mobile end device in order to
operate functions via the Home
Connect app, adjust basic settings or
monitor the current operating status.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information about this can be
found at: www.home-connect.com.
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Hints
¡Take the enclosed documentation
of Home Connect.
Apple App Store and the Apple App Store logo are trademarks of Apple Inc.
1
Google Play and the Google Play logo are trademarks of Google LLC.
36
¡Also take the directions
the Home Connect app.
Comments
¡Observe the safety instructions
in this manual and ensure that they
are also observed when you operate
the appliance via the Home Connect
app.
→ "Safety", page 4
¡The controls on the device
always has priority. During this
time, operation via the Home
Connect app is not possible.
15.1 Set up the Home
Connect app
Install the Home Connect app on
1.
the mobile device.
1
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides you
through the entire registration process.
15.2 Setting up Home Connect
Requirements
¡The Home Connect app is on it
mobile terminal device
installed.
¡Wi-Fi on the router is activated. ¡
The device has in place
of setup reception of the home
network (Wi-Fi).
Advertisement
Table of Contents
