Deactivating The Child Lock; Home Connect; App; Setting Up Home Connect - Bosch WGB24407NL User Manual And Installation Instructions

Table of Contents

Advertisement

NLHomeConnect
aThe child lock also remains in standby
of the device and active in the event of a
power failure.
14.2 Deactivate child lock
Required:To deactivate the child lock,
the appliance must be switched on.
Approx. 3 s up 3 secondsto press.
In order not to cancel the running
programme, the program selector
must be set to the initial
programme.
1 5 HomeConnect
This device is network-enabled.
Connect your appliance to a mobile
end device in order to operate
functions via the Home Connect app,
adjust basic settings or monitor the
current operating status.
The Home Connect services are not
available in every country. The
availability of the Home Connect
function depends on the availability of
the Home Connect services in your
country. Information about this can be
found at: www.home-connect.com.
The Home Connect app guides you
through the entire registration
process. Follow the instructions in the
Home Connect app to make the
settings.
Hints
¡Take the enclosed documentation
of Home Connect. ¡Also take the
directions
the Home Connect app.
Apple App Store and the Apple App Store logo are trademarks of Apple Inc.
1
Google Play and the Google Play logo are trademarks of Google LLC.
36
Comments
¡Observe the safety instructions
in this manual and ensure that they
are also observed when you operate
the appliance via the Home Connect

app.

→ "Safety", page 4
¡The controls on the device
always has priority. During this
time, operation via the Home
Connect app is not possible.
15.1 Set up the Home
Connect app
Install the Home Connect app on
1.
the mobile device.
1
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides you
through the entire registration process.

15.2 Setting up Home Connect

Requirements
¡The Home Connect app is on it
mobile terminal device
installed.
¡Wi-Fi on the router is activated. ¡
The device has in place
of setup reception of the home
network (Wi-Fi).
Approx. 3 seconds on Control via
1.
Appto press.
Follow the instructions in the
2.
Home Connect app.

Advertisement

Table of Contents
loading

Table of Contents