Table of Contents
Advertisement
Malfunction
High centrifuge
rental is not
reached.
Program centrifuge
run does not start.
Sparkling, hissing
loud.
Loud noise during
spin.
Clapping, rattling
in the pump.
Slurping, rhythmic
suction sound.
Creasing.
Cause and Troubleshooting
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is distributed better during the spin cycle.
Launch the programCentrifuge.
▶
Drain pipe or water drain hose is clogged.
Clean the drain pipe and the water drain hose.
▶
Drain pipe or water drain hose is kinked or
trapped.
Make sure that the drain pipe and the water
▶
drain hose are not kinked or trapped.
The imbalance detection system has stopped the spin
cycle due to uneven distribution of the laundry.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Laundry of different
sizes is distributed better during the spin cycle.
Launch the programCentrifuge.
▶
Water is flushed under pressure into the detergent
drawer.
No error - normal operating noise.
▶
The appliance is not leveled correctly.
→ "Adjusting the device", page 16
▶
Device feet are not fixed.
Secure the device feet.
▶
→ "Adjusting the device", page 16
Transport protection devices have not been removed.
→ "Remove transport protection", page 14 .
▶
A foreign object has entered the pump.
→ "Clean the drain pump", page 41
▶
Pump is active, the suds are pumped out.
No error - normal operating noise.
▶
Spin speed is too high.
Set a lower spin speed for the next wash.
▶
The load amount is too high.
TroubleshootingNL
51
Advertisement
Table of Contents
