Specifications For Originals That Can Be Scanned; General Specifications For Originals Being Scanned; Scannable Standard Size Originals - Epson ES-C320W User Manual

Placing Originals
>

Specifications for Originals that can be Scanned

This section explains the specifications and conditions of originals that can be loaded in the ADF.

General Specifications for Originals Being Scanned

Type of Original
Fine paper
Plain paper
Recycled paper
Post cards
Business cards
Envelopes
Plastic cards complying with ISO7810
ID-1 type (with or without emboss)
Laminated cards
Thermal paper
Note:
❏ All originals must be flat at the leading edge.
❏ Make sure that curls on the leading edge of the originals are kept within the following range.
A
must be 5 mm or less.
B
must be 3 mm or less.
C
must be greater than or equal to
B
times the size of .
❏ Even when the original meets the specifications for originals that can be placed in the ADF, it may not feed from the ADF
depending on the paper properties or quality. Additionally, some originals may decrease the scan quality.

Scannable Standard Size Originals

These are the specifications for standard size originals that you can scan.

Specifications for Originals that can be Scanned

Thickness
When scanning in the vertical path
position: 40 to 127 g/m2
When scanning in the straight path
position: 40 to 413 g/m2
When scanning A6 size or smaller
originals: 40 to 209 g/m2
B B
if is less than 1 mm. When
>
Scannable Standard Size Originals
Size
Max: 215.9×3,048 mm (8.5×120.0 in.)
Min: 50.8×50.8 mm (2.0×2.0 in.)
The loadable size varies depending on
the type of the originals and the
scanning resolution.
B
is greater than 1 mm, it should be at least 10
37