Epson ES-C320W User Manual page 60

Placing Originals
>
6. Adjust the edge guides to fit the edges of the original so that there are no gaps. If there are any gaps, the
original may be fed skewed.
Note:
❏ If the edge guides are too far apart or too tight, the original may not be fed correctly. The edge guides should be
aligned so that they lightly touch the edges of the original.
❏ Also, while scanning long paper, support both ends of the original with your hands to prevent it from tilting.
❏ You can scan long paper at the following resolutions.
· Up to 393.7 mm: 600 dpi or less
· 393.7 mm to 3,048 mm: 300 dpi or less
❏ You need to specify the paper size in the Epson Scan 2 window.
When you are using Epson ScanSmart, you can open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
On the Main Settings tab in Epson Scan 2, select Auto Detect (Long Paper) as the Document Size.
Placing Originals in the Scanner
>
Placing Long Paper
60