Epson ES-C320W User Manual page 31

Scanner Basics
>
Information on Applications
Example: For Microsoft Edge
Note:
❏ If a warning screen is not displayed, go to the next step.
❏ For IPv6 addresses, use the following format.
Format: http://[scanner's IP address]/
Example: http://[2001:db8::1000:1]/
3. To change scanner settings, you need to log in as a Web Config administrator.
Click Log in at the top-right of the screen. Enter the User Name and Current password, and then click OK.
The following provides the initial values for the Web Config administrator information.
·User name: none (blank)
·Password: Depends on the label attached to product.
If there is a "PASSWORD" label attached to the back, enter the 8-digit number shown on the label. If there is
no "PASSWORD" label attached, enter the serial number on the label attached to the base of the product for
the initial administrator password.
Note:
If Log out is displayed at the top-right of the screen, you are already logged in as an administrator.
Related Information
"Checking the Scanner's IP Address" on page 101
&
How to Run Web Config on Windows
When connecting a computer to the scanner using WSD, follow the steps below to run Web Config.
1. Open the scanner list on the computer.
❏ Windows 11
Click the start button, and then select Bluetooth & devices > Printers & scanners.
>
Application for Configuring Scanner Operations (Web Config)
31