Filling Sprayer With Storage Fluid - Graco Magnum Pro Plus A30 Operation Instructions Manual

Cleanup

Filling Sprayer with Storage Fluid

Always pump storage fluid through pump system after
cleaning. Water left in sprayer will corrode sprayer and
damage pump.
1. Remove inlet strainer. Place suction tube in storage
fluid bottle and prime tube in waste pail.
2. Turn Prime/Spray valve to PRIME.
3. Turn pressure control knob all the way left (counter-
clockwise) to minimum pressure.
•
18
ti2057a
ti2019a
ti2020a
4. Turn ON power switch.
ti2028a1
5. Align arrow on sprayer with roller symbol on pres-
sure control knob.
6. When storage fluid comes out of prime tube (5-10
seconds) turn OFF power switch.
7. Turn Prime/Spray valve to SPRAY to keep storage
fluid in sprayer during storage.
ti2044a
ti2058a
ti2059a
3A1177B