BMW R 18 B 2021 Rider's Manual page 137

Screw on quick-release axle
M20 x 1.5 - 8.8
37 lb/ft (50 Nm)
Position brake caliper 1 on right and install
screws 2.
Brake caliper on telescopic forks
M10 x 40 - 10.9
41 lb/ft (56 Nm)
Position brake caliper 1 on left and install
screws 3.
Brake caliper on telescopic forks
M10 x 40 - 10.9
41 lb/ft (56 Nm)
Fasten cable tie 2.
WARNING
Brake pads do not contact the brake
disc
Risk of accident due to delayed braking
effect.
Before driving off, check that the brak-
ing effect kicks in without any delay.
Engage the brakes repeatedly until the
brake pads make contact with the discs.
Remove the adhesive tape from the wheel
rim.
Remove the front wheel stand.
Tighten the clamping bolts on left 1 and
right 2 to the appropriate torque.
Clamping bolts in the axle adapter
Tightening sequence: Tighten the screws
6 times, alternating between one and the
other each time
M8 x 35 - 8.8
131