Listening To Radio Broadcasts - Sherwood NewCastle R-671 Operating Instructions Manual

LISTENING TO RADIO BROADCASTS

Auto tuning
Select the tuner.
1
Select the auto tuning mode.
3
• Each time this button is pressed, the mode
changes as follows;
Manual tuning
• Manual tuning is useful when you already know the
frequency of the desired station.
• Select the manual tuning mode performing the
steps ① to ③ in "Auto tuning" procedure and press
the TUNING/PRESET ▲/▼or TUNE +/- buttons
repeatedly until the right frequency has been
reached.
• When pressing the TUNE +/- buttons repeatedly
on the remote control, you need not select the
manual tuning mode on step ③ in "Auto tuning"
procedure.
Select the desired band.
2
• Each time this button is pressed, the band is
changed to FM or AM.
• When pressing the BAND button without
selecting the TUNER, the tuner will be selected
automatically.
Press the TUNING/PRESET ▲/▼
4
buttons briefly or press the TUNE +/-
buttons for more than 0.5 second.
• The tuner will now search until a station of
sufficient strength has been found. The display
shows the tuned frequency and "TUNED".
• If the station found is not the desired one, simply
repeat this operation.
• Weak stations are skipped during auto tuning.
• When pressing the TUNE +/- buttons for more
than 0.5 second on the remote control, you need
not select the auto tuning mode on step ③.
Presetting radio stations
• You can store up to 30 preferred stations in the
memory.
Tune in the desired station with auto or
1
manual tuning.
Press the MEMORY/ENTER button.
2
• "MEM" is flickering for several seconds.
34