Table of Contents
Advertisement
Adjusting the tone(bass and treble)
Enter the tone mode.
10
• Each time this button is pressed, the
corresponding tone mode is selected and
shown for several seconds as follows:
• When the tone mode is off, "TONE OFF" is
shown.
At the desired tone mode, adjust the
11
tone as desired.
• At "TONE ON" mode, you can select "TONE
OFF" mode and vice versa.
TONE ON : When adjusting the tone for your taste.
("DIRECT" indicator goes off.)
TONE OFF : When listening to a program source
without the tone effect.
("DIRECT" indicator lights up.)
• In general, we recommend the bass and the
treble to be set to 0(flat) level.
Notes:
• If the tone display disappears, start from the
step ⑩ again.
• Extreme settings at high volume may damage
your speakers.
• When the digital signals from DTS, Dolby
Digital or MPEG program sources are input or
the EXTERNAL IN is selected as an input
source, you cannot adjust the tone and can
hear a program source without the tone effect.
26
Hide quick links:
Advertisement
Table of Contents
