Canon Pixma MP495 Series On-Screen Manual page 728

Monitoring Wireless Network Status
>
Advanced Guide About Network Communication
Network Status
N018
Monitoring Wireless Network Status
1.
Start up the Canon IJ Network Tool.
Starting up Canon IJ Network Tool
2.
Select the printer in Printers.
3.
Select Status from the View menu.
1. Signal Strength
Indicates the strength of the signal received by the printer, ranging from 0% to 100%.
2. Link Quality
Indicates the signal quality excluding the noise while communicating, ranging from 0% to 100
%.
Important
If the indicated value is low, move your printer closer to the wireless network device.
3. Advanced Measurement
Click to examine the connection performance between the printer and the access point. Follow
the instructions on the screen to start measuring and display the status. Measurement takes a
few minutes.
When
is displayed in Connection Performance between the Printer and the Access Point,
the printer can communicate with the access point. Otherwise, refer to displayed comments
and Help for improving the status of communication link.
Note
If any messages appear on Overall Network Performance, move the machine and access
point as instructed to improve the performance.
>
Changing and Confirming Network Settings
Page 728 of 759 pages
> Monitoring Wireless
Page top