Canon Pixma MP495 Series On-Screen Manual page 614

An Error Code Is Displayed on the LED
>
Advanced Guide Troubleshooting
U305
An Error Code Is Displayed on the LED
Alarm Lamp Is Lit Orange
When a machine error occurs, the Alarm lamp is lit orange and the error code as follows is
displayed on the LED. Check the error code displayed on the LED and take the appropriate action
to correct the error.
* Depending on the error occurred, the Alarm lamp is not lit.
Error Code
E, 0, 2
(LED display)
E, 0, 3
(LED display)
E, 0, 4
E, 0, 5
(LED display)
E, 0, 7
> An Error Code Is Displayed on the LED
Cause
The machine is out of
paper./Paper does not
feed.
Paper Output Tray is
closed./Paper jam.
The FINE Cartridge cannot
be recognized.
FINE Cartridge is not
Action
Reload the paper on the Rear Tray
correctly and press the Black or
Color button.
If the Paper Output Tray is closed,
open it. The machine resumes
printing.
If opening the Paper Output Tray
does not resolve the problem, or if
the tray was open to begin with, the
paper may be jammed. Remove the
jammed paper, reload paper properly
in the printer, then press the Black or
Color button.
Paper Jams
The FINE Cartridge may not be
installed properly, or the Cartridge
may not be compatible with this
machine.
Open the Scanning Unit (Cover) and
install the appropriate FINE
Cartridge. After that, push the Ink
Cartridge Locking Cover until it clicks
into place, then close the Scanning
Unit (Cover).
If the error is not resolved, contact the
service center.
Make sure that each FINE Cartridge
Page 614 of 759 pages