Canon Pixma MP495 Series On-Screen Manual page 5

Main Components
(7)
Platen Glass
Load an original to copy or scan.
(8) Wi-Fi lamp
Lights or flashes blue to indicate the wireless LAN status.
Lights: Wireless LAN connection is enabled.
Flashes: Printing or scanning over wireless LAN. Also flashes while searching for wireless LAN access
point during setup and when connecting to the access point.
(9) Operation Panel
Use to change the settings of the machine or to operate it.
See Operation Panel
Note
The LED and lamps on the Operation Panel other than the
machine is not operated for about 5 minutes. To restore them, press any button except the
ON button or perform the print operation.
Rear View
(10)
USB Port
Plug in the USB cable to connect the machine with a computer.
Important
Do not touch the metal casing.
Do not plug in or unplug the USB cable while the machine is printing or scanning originals
with the computer.
(11)
Power Cord Connector
Plug in the supplied power cord.
.
POWER
lamp will go out if the
Page 5 of 759 pages