Canon Pixma MP495 Series On-Screen Manual page 564

Scan Tab
> >
Advanced Guide Scanning
Tab
S810
Scan Tab
On the Scan tab, you can specify the following settings.
Status of ScanGear dialog after scanning
Select what to do with ScanGear (scanner driver) after scanning images.
Close ScanGear automatically
Select this to return to the original application when scanning is completed.
Do not close ScanGear automatically
Select this to return to the ScanGear screen for another scan when scanning is completed.
Display the dialog to select next action
Select this to open a screen and select what to do when scanning is completed.
Note
Even if Do not close ScanGear automatically or Display the dialog to select next action is set,
some applications may not support it.
Scanning with Other Application Software >
ScanGear (Scanner Driver) Screens
Page top
Page 564 of 759 pages
> Scan