Canon Pixma MP495 Series On-Screen Manual page 615

An Error Code Is Displayed on the LED
(LED display)
E, 0, 8
(LED display)
E, 1, 3
(LED display)
E, 1, 4
(LED display)
E, 1, 5
(LED display)
installed in the correct
position.
Ink absorber is almost full.
The remaining ink level
cannot be detected.
The FINE Cartridge cannot
be recognized.
The FINE Cartridge cannot
be recognized.
is installed in the correct position.
Routine Maintenance
or Color
Press the machine's Black
button to continue printing. Contact
the service center.
The ink may have run out.
The function for detecting the
remaining ink level will be disabled
since the ink level cannot be correctly
detected.
If you want to continue printing
without this function, press the
Reset ) button for at
machine's Stop (
least 5 seconds.
Canon recommends to use new
genuine Canon cartridges in order to
obtain optimum qualities.
Please be advised that Canon shall
not be liable for any malfunction or
trouble caused by continuation of
printing under the ink out condition.
The FINE Cartridge may not be
compatible with this printer.
Install the appropriate FINE
Cartridge.
Routine Maintenance
The FINE Cartridge may not be
installed properly.
Open the Scanning Unit (Cover) and
install the FINE Cartridge properly.
Routine Maintenance
Page 615 of 759 pages