Canon Pixma MP495 Series On-Screen Manual page 49

Loading Originals
> Loading Paper / Originals
Contents
C077
Loading Originals
Loading Originals
Originals You Can Load
Loading Originals
Load originals to copy or scan on the Platen Glass.
Important
After loading the original, be sure to close the Document Cover before starting to copy or scan.
When scanning from a computer using a software application, you need to load the original in a
different way.
For details, refer to the on-screen manual:
1.
Load an original on the Platen Glass.
Open the Document Cover.
(1)
Important
Do not place any object on the Document Cover. It will fall into the Rear Tray when the
Document Cover is opened and cause the machine to malfunction.
Load the original WITH THE SIDE TO SCAN FACING DOWN on the Platen
(2)
Glass.
Align the corner of the original with the alignment mark
Important
Be sure to observe the following when loading the original on the Platen Glass.
- Do not place any objects weighing 4.4 lb / 2.0 kg or more on the Platen Glass.
- Do not put any pressure of 4.4 lb / 2.0 kg or more on the Platen Glass, such as pressing
down the original.
Failure to observe the above may cause the scanner to malfunction or the Platen Glass to
break.
The machine cannot scan the shaded area (A) (0.04 inches / 1 mm from the edges of the
Platen Glass).
> Loading Originals
Advanced Guide .
Advanced Guide Troubleshooting
.
Page 49 of 759 pages