Canon Pixma MP495 Series On-Screen Manual page 58

Cleaning the Print Head Deeply
> Routine Maintenance
Contents
Deeply
C097
Cleaning the Print Head Deeply
If print quality does not improve by the standard cleaning of the Print Head, clean the Print Head deeply.
Cleaning the Print Head deeply consumes more ink than the standard cleaning of the Print Head, so
clean the Print Head deeply only when necessary.
1.
Make sure that the power is turned on.
2.
Clean the Print Head deeply.
(1) Press the (Maintenance) button repeatedly until
Press the Black or Color button.
(2)
The machine starts cleaning the Print Head deeply.
Do not perform any other operations until the machine completes the deep cleaning of the Print Head. This
takes about 2 minutes.
3.
Check the print head condition.
When the deep cleaning is completed, the LED returns to the copy standby mode.
To check the print head condition, print the nozzle check pattern.
See Printing the Nozzle Check Pattern
If the problem is not resolved, turn off the power and clean the Print Head deeply again after 24 hours.
If the problem is still not resolved, replace the FINE Cartridge with a new one.
See Replacing a FINE Cartridge
If the problem is still not resolved after replacing the FINE Cartridge, contact the service center.
>
When Printing Becomes Faint or Colors Are Incorrect
.
.
Advanced Guide Troubleshooting
> Cleaning the Print Head
y appears.
Page top
Page 58 of 759 pages