Table of Contents
Advertisement
Chapter 36 Configuration
Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from your
computer to your Device.
Table 116 Restore Configuration
LABEL
File Path
Browse...
Upload
Do not turn off the Device while configuration file upload is in progress.
After the Device configuration has been restored successfully, the login screen appears. Login again
to restart the Device.
The Device automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.
Figure 152 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
Appendix B on page 317
If the upload was not successful, the following screen will appear. Click OK to go back to the
Configuration screen.
Figure 153 Configuration Upload Error
294
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse ... to find it.
Click this to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Click this to begin the upload process.
for details on how to set up your computer's IP address.
VMG1312-B10B / VMG1312-B30B Series User's Guide
Advertisement
Table of Contents
