Remove The Solid-State Drive (Ssd) Module - Lenovo ThinkBook 14s Yoga Gen 3 Hardware Maintenance Manual

Screw specifications
M2 x L4
Go to https://support.lenovo.com/partslookup
part:
Battery pack

Remove the solid-state drive (SSD) module

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw.
Figure 6. Remove one screw
Screw specifications
M2 x L2
Step 3. Remove the SSD by pulling it away from the slot.
Figure 7. Remove the SSD by pulling it away from the slot
32
Hardware Maintenance Manual
Number of screws
3
to look up the Lenovo part number of the following replacement
Number of screws
1