Figure 16. Remove the I/O brackets
Screw specifications
M2 x L4
Go to
https://support.lenovo.com/partslookup
replacement parts:
I/O bracket (left)
I/O bracket (right)
Remove the memory module
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 30
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the memory module shielding.
Figure 17. Remove the memory module shielding
38
Hardware Maintenance Manual
Number of screws
5
to look up the Lenovo part numbers of the following