Provisioning; Accessing The Management Interface - ADC HiGain HXU-358 Manual

LTPH-TP-1044-01, Issue 1
P
ROVISIONING
Using Terminal Access Option (TAO) management software, the HMU-319
configures and manages the HXU-358.
Refer to the Wideband 3190 installation guide and the technical practice for
the HMU-319 for complete information about connecting a maintenance
terminal.
For installation in ACE chassis, see
ACE Chassis" on page
Also, refer to your Central Office (CO) system plans for provisioning details.
A
CCESSING THE
The HiGain Management Unit interface presents the user with an interactive,
text-based, menu-driven interface that configures, monitors, and controls a
Wideband 3190 and all the components that it comprises. By connecting a
local or remote maintenance terminal to the HMU-319, you gain access to the
craft port user interface which displays menus and prompts to guide you
through a provisioning process. This process involves:
•
Logging On To the System through the HMU
•
Selecting a Shelf
•
Configuring the HMU to Access the HXU-358
•
Accessing HXU-358
Figure 5 on page 10
provides access to the HLU maintenance terminal screens and to the
HXU-358 software interface.
If you would like more information about the HMU, refer to the
technical practice for the HMU-319 or the Provisioning
Reference section of the Wideband 3190 Installation Guide.
HXU-358 V1.04
"Appendix B - HXU-358 Installation for
53.
M
ANAGEMENT
(see page 11)
(see page 12)
shows the general structure of the TAO software. It
April 6, 2001
I
NTERFACE
(see page 10)
(see page 11)

Provisioning

9