Cobra 12 BAND XRS 9630 Operating Instructions Manual page 7

9495 XRS 9630-D-B2 4/10/06
EasySet Programming
Your Detector
This EasySet programming menu lists all of the modes and settings you can
choose from after you have entered Program mode as described on page 7.
EasySet Programming Menu
Mode Tone Visual Setting Result
Set City Two beeps City X A single beep sounds when the
mode signal is first detected.
default*
One beep City X Audio for all X band alerts are blocked
beep Off until signal strength reaches Level 3.
One beep City X+K Combines the City X mode with
prevention of K band audio alerts
until signal strength reaches Level 2.
IntelliMute Two beeps IntelliMute On All alerts (except for strobe signals
mode from emergency vehicles) are
automatically muted below the
engine rev point you set.
One beep IntelliMute Off Normal operation.
Set IntelliMute One beep Set IntelliMute Allows you to set the engine
RPMs (see page 14 rev point while using IntelliMute.
(not shown to set activation
if IntelliMute point)
is off)
AutoMute Two beeps AutoMute On The audio volume of all alerts will be
mode automatically muted after four seconds for
as long as the signal is detected.
One beep AutoMute Off All alerts will sound at full volume
for as long as the signal is detected.
Set compass One beep Set Compass Allows you to calibrate the compass.
(see page 16
to calibrate
compass)
Pop Detect Two beeps Pop Detect On Unit will detect Pop signals.
mode
One beep Pop Detect Off Unit not will detect Pop signals.
* The settings for these user modes can also be changed with the one button method.
See description of each user mode (pages 10 and 23) for details.
8 English
11:59 AM Page 8
Your Detector
Mode
VG-2 Detect
mode
VG-2 Audio
mode (not
shown if VG-2
detect is off)
Spectre 1
Detect mode
Spectre 1
Audio mode
(not shown if
Spectre 1
detect is off)
SmartPower
mode
K or Ku Band
detect mode
X Band
detect mode
Set display
Dim mode
default*
Restore factory
settings
Exit program
EasySet Programming
Tone Visual Setting Result
Two beeps VG-2 Detect On Unit will detect VG-2 signals.
One beep VG-2 Detect Off Unit will not detect VG-2 signals.
Two beeps VG-2 Audio On With VG-2 Detect on, the unit will give
audible alerts for VG-2 signals.
One beep VG-2 Audio Off With VG-2 Detect off, the unit will give
only visual alerts for VG-2 signals.
Two beeps Spectre 1 Unit will detect Spectre 1 signals.
Detect On
One beep Spectre 1 Unit will not detect Spectre 1 signals.
Detect Off
Two beeps Spectre 1 Audio With Spectre 1 Detect on, the unit will
On give audible alerts for Spectre 1 signals.
One beep Spectre 1 Audio With Spectre 1 Detect off, the unit will give
Off only visual alerts for Spectre 1 signals.
Two beeps SmartPower On SmartPower is on.
One beep SmartPower Off SmartPower is off.
Two beeps K or Ku Band On Unit will detect K or Ku Band signals.
One beep K or Ku Band Off Unit will not detect K or Ku Band signals.
Two beeps X Band On Unit will detect X Band signals.
One beep X Band Off Unit will not detect X Band signals.
Two beeps Display Dim Partially dimmed for dusk or night driving.
One beep Display More dimmed for dusk or night driving.
Dimmer
One beep Display Dark Display is off.
One beep Restore Factory Resets user modes and settings to
Settings factory default.
One beep EXIT PROGRAM Allows you to exit Program mode.
Nothing Comes Close to a Cobra ® 9