Polycom VVX 500 User Manual page 41

To pair and connect your Bluetooth headset with your phone:
1 Turn your Bluetooth headset on and place the headset in discovery mode. To place your headset
in discovery mode, refer to your headset documentation.
2 From Home view, tap Settings > Basic > Bluetooth Settings > Manage BT Headsets. A list of all
paired and connected headsets displays, as shown next.
The icon next to each headset indicates headset status:
○ Bluetooth icon
○ Bluetooth/Headset icon
In the following example, the first headset is paired but not connected, and the second headset is
both paired and connected.
3 Do one of the following:
○ If your headset is listed, but it's just paired and not connected (that is, it has
to step 5 to connect it.
or
○ If your headset isn't listed, find the headset by tapping Scan. Make sure your headset is in
discovery mode before you tap Scan. The message Place device in discoverable mode reminds
you to do this. Refer to your headset documentation for information on how to place your
headset in discovery mode.
All the nearby devices in discovery mode will be added to the list, as shown next. A red icon
displays next to each unpaired headset.
This document is offered to you by www.telecomsupplier.com
—indicates that the headset is paired but not connected.
—indicates that the headset is both paired and connected.
Chapter 2: Using Basic Features
next to it), go
29