Table of Contents
Advertisement
TG6500C_Preparation.fm Page 26 Thursday, September 30, 2004 4:54 PM
Programmable Settings
Ringer Volume
You can set the handset and base unit ringer volumes to high, medium, low, or off
for each line. The factory preset for both lines is HIGH.
If the handset or base unit ringer is turned off for both lines, the handset or base unit
will ring at the low level for intercom calls, and will not ring for outside calls.
Handset ringer volume
1
Press [MENU].
2
Scroll to "Ringer setting" by pressing
[d] or [B], then press the soft key (
3
Press the soft key (
volume".
4
Press [d] (Line1) or [B] (Line2) to select
the line.
5
Select the desired volume by pressing [d] or
[B].
• The volume will change and ring.
• The number of steps indicates the volume level.
• To turn the ringer off, press [d] repeatedly until
"Off ?" is displayed.
To change the ringer tone, press the soft key
(
). Select the ringer tone by pressing
TONE
[d] or [B]. See "Handset ringer tone" on
page 28, step 5.
6
Press the soft key (
• To select the other line, repeat from step 3.
7
Press [OFF].
• If the handset ringer is turned off for a line, the handset displays "Ringer off"
and the line number while the handset is not in use. If there are new messages,
"Ringer off" will not be displayed.
• You can also adjust each line's ringer volume while the line is ringing. Press [d] or
[B] while the handset is ringing.
26
Handset
SELECT
) at "Ringer
SELECT
).
SAVE
Ringer setting
).
Ringer volume
Ringer volume
=Line1
=Line2
B
d
e.g. High
Ringer volume L1
Low
High
dB
BACK
TONE
SAVE
e.g. Off
Ringer volume L1
Off ?
Advertisement
Table of Contents
