Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

Panasonic KX-TG6500 Operating Instructions Manual

Panasonic operating instructions 5.8 ghz expandable cordless phone system kx-tg6500, kx-tg6502.

 
Model shown is KX-TG6500.
The unit is Caller ID compatible. To display the caller's name and phone number,
you must subscribe to Caller ID service.
PLEASE READ BEFORE USE AND SAVE.
Charge the battery for 6 hours before initial use.
Panasonic World Wide Web address: http://www.panasonic.com
for customers in the USA or Puerto Rico
5.8 GHz Expandable Cordless Phone System
Operating Instructions
Model No.
KX-TG6500
KX-TG6502
Pulse-or-tone dialing capability

Summary of Contents

  • Page 1

    Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www.panasonic.com for customers in the USA or Puerto Rico 5.8 GHz Expandable Cordless Phone System Operating Instructions Model No.

  • Page 2

    Attach your purchase receipt here. Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.

  • Page 3

    Expanding Your Phone For KX-TG6500 users KX-TG6500 includes 1 handset and 1 base unit. You can expand the system by adding up to 3 accessory handsets, sold separately. A maximum of 4 handsets can be registered to the base unit.

  • Page 4: Table Of Contents

    Installation ....12 Connecting the AC Adaptor . . 12 Connecting the Telephone Line Cord....13 Installing the Battery in the Handset.

  • Page 5: Table Of Contents

    Temporary Tone Dialing (For Rotary or Pulse Service Users). . 66 For Call Waiting Service Users ....66 FLASH Button ... . . 67 Incoming Call Tone .

  • Page 6: For Best Performance

    For Best Performance Battery charge The handset is powered by a rechargeable Nickel-Metal Hydride (Ni-MH) battery. Charge the battery for 6 hours before initial use (p. 16). Base unit location/Noise Calls are transmitted between the base unit and handset using wireless radio waves.

  • Page 7: Location Of Controls

    Location of Controls Base unit [MEMO] Button (p. 78) [ERASE] Button (p. 77) Display (p. 11) [PROGRAM] PROGRAM PROGRAM Button (p. 54) [AUTO] Button (p. 54) [GREETING REC] (Record) Button (p. 28) Charge Contacts (p. 17) Antenna [*] (TONE) Button (p. 66) (p.

  • Page 8

    Location of Controls Handset Back side Speaker Display (p. 10) Headset Jack (p. 87) ] (TALK) Button (p. 33) [s] (Speakerphone) Button (p. 33) [*] (TONE) Button (p. 66) [HOLD/INTERCOM] Button (p. 35, 55) [FLASH/CALL WAIT] Button (p. 66, 67) Charger unit (KX-TG6502 only) Charge Contacts (p.

  • Page 9

    How to use the soft keys/navigator keys Handset soft keys SPIPRIVACY1 IN USE LINE1 LINE2 SEARCH Pressing the right soft key selects “ Pressing the middle soft key selects “ Pressing the left soft key selects “ • When a function name does not appear above a soft key, the soft key has no function.

  • Page 10: Displays

    Displays Handset “ ” and “ ” indicate the status of each line as follows: Off (invisible) Flashing Flashing rapidly “SP” is shown when you are using the handset speakerphone. “ ” indicates Voice Enhancer mode is on (p. 36). “PRIVACY”...

  • Page 11

    Base unit 1 2 3 F F ULL LINE LINE LINE LINE “ ” flashes until you set the date and time, and flashes after a power failure. If it is flashing, set the date and time (p. 20). Message counter shows: —...

  • Page 12: Installation, Connecting The Ac Adaptor

    Connecting the AC Adaptor Base unit Raise the antennas. • Base unit: USE ONLY WITH Panasonic AC ADAPTOR PQLV1 (Order No. PQLV1Z). • The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.) •...

  • Page 13: Line Cord

    Connecting the Telephone Line Cord Connect the telephone line cord(s) to the base unit. If your unit is connected to a telephone line with DSL service, see page 15. To connect to a 2-line telephone jack GREEN Plug For assistance, please call: 1-800-211-PANA(7262)

  • Page 14

    Installation To connect to 2 single-line telephone jacks TRANSPARENT GREEN Plug Plug If you use the unit as a single-line telephone only TRANSPARENT Plug Single-Line Telephone Jacks (RJ11C) 4-Wire Telephone Line Cord with GREEN Plugs 2-Wire Telephone Line Cord with...

  • Page 15

    For DSL service users If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s name and/or phone number properly. We recommend connecting a noise filter* (contact your DSL service provider) to the DSL telephone line between the base unit and the telephone line jack.

  • Page 16: The Handset, Battery Charge

    Installation Installing the Battery in the Handset Insert the battery (1), and press it down until it snaps into the compartment (2). Close the cover. To replace the battery: Press the notch on the cover firmly and slide it as indicated by the arrow.

  • Page 17

    A nickel metal hydride battery that is recyclable powers the product you have purchased. Please call 1-800-8-BATTERY for information on how to recycle this battery Battery information After your Panasonic battery is fully charged, you can expect the following performance: Operation While in use (TALK) While not in use (Standby) While using the Clarity Booster feature (p.

  • Page 18: Programmable Settings, Programming Guidelines

    Programmable Settings Programming Guidelines The unit has several programmable functions which can be selected from the function menu on the display (p. 19). The soft key works The soft key works as the as the BACK BACK Navigator key scrolls Navigator key scrolls through the menu.

  • Page 19: Function Menu Table

    Function Menu Table You can use the following functions to customize your unit. See the corresponding pages for function details. • After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys (p. 88, 89). Main menu p.

  • Page 20: Date And Time

    Programmable Settings Date and Time We recommend you set the date and time so that the unit will announce the day and time each message was recorded when you play back messages. Press [MENU]. Scroll to “Date and time” by pressing [d] or [B], then press the soft key ( (1) Enter 2 digits each for the month, day and year.

  • Page 21: Display Language, Dialing Mode

    Display Language You can select either “English” or “Spanish” as the display language. The factory preset is “English”. Press [MENU]. Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( Scroll to “Change language” by pressing [d] or [B], then press the soft key ( To change from English to Spanish, press the soft key (...

  • Page 22: Line Mode

    Programmable Settings Line Mode Handset The line mode for both lines is preset to “B” and generally should not be adjusted. If the line buttons on the base unit do not light properly, or the line status icons ( ) are not displayed on the handset properly, the line mode selection is incorrect.

  • Page 23: Auto Talk, Lcd Contrast

    Auto Talk Handset The Auto Talk feature allows you to answer calls by simply lifting the handset off the base unit or charger (for KX-TG6502 or accessory handset users, p. 3). You do not need to press [C] or [s]. The factory preset is OFF. Press [MENU].

  • Page 24: Ringer Volume

    Programmable Settings Ringer Volume You can set the handset and base unit ringer volumes to high, medium, low, or off for each line. The factory preset for both lines is HIGH. If the handset or base unit ringer is turned off for both lines, the handset or base unit will ring at the low level for intercom calls, and will not ring for outside calls.

  • Page 25

    Temporary ringer off While the handset is ringing, you can turn the ringer off temporarily by pressing [OFF]. The handset will ring again the next time a call is received for that line. Base unit ringer volume Base Unit Make sure the base unit is not being used. Select either line by pressing [LINE SELECT] until “LINE 1”...

  • Page 26: Ringer Tone

    • If you subscribe to a Distinctive Ring Service (such as IDENTA-RING) from your telephone company with 2 or 3 consecutive rings, select a bell ringer pattern (Tone 1 to 4). If you select a melody pattern, you will not be able to distinguish lines by their ringers.

  • Page 27

    Base unit ringer tone Base Unit Make sure the base unit is not being used. Select either line by pressing [LINE SELECT] until “LINE 1” or “LINE 2” is announced. • The selected line ( LINE 1 • Do not select both lines. You cannot set the ringer for both lines at the same time.

  • Page 28: System, Greeting Message

    Preparing the Answering System Greeting Message You can record a personal greeting message of up to 2 minutes for each line or a common greeting message for both lines. If you do not record your own message, one of 2 pre-recorded greetings will be played for callers (p. 29). The total recording time of all messages (greeting, incoming and memo) is about 60 minutes.

  • Page 29

    • If “ ” is displayed, 6 beeps sound and “Your greeting was not recorded. Record your greeting again.” is announced, start again from step 1. To review the greeting 1. Select the line(s) by pressing [LINE SELECT]. 2. Press [GREETING CHECK]. •...

  • Page 30: Caller's Recording Time

    Preparing the Answering System Caller’s Recording Time You can select “1 minute”, “2 minutes”, “3 minutes” or “Greeting only” for the caller’s recording time. Each line has its own setting. The factory preset for both lines is “3 minutes”. Press [MENU]. Scroll to “Initial setting”...

  • Page 31: Number Of Rings

    Number of Rings You can select the number of times the unit rings before the Answering System answers a call, from “2” to “7” or “Toll saver”*. Each line has its own setting. The factory preset for both lines is “4”. Press [MENU].

  • Page 32: Recording Mode, Message Alert

    Preparing the Answering System Recording Mode 2 recording modes are available. The factory preset is “Standard recording (60 min)”, which provides more recording time (60 min) and standard sound quality. “Enhanced recording (30 min)” provides less recording time (30 min) but clearer sound quality. Press [MENU].

  • Page 33: Making Calls, Using The Handset

    2 or more handsets (p. 3). The maximum operating number may decrease depending on the state of use. 2 outside calls can be handled simultaneously on separate telephone lines by the handset and the base unit, or by 2 handsets.

  • Page 34

    Making Calls Hands-free Digital Duplex Speakerphone For best performance, please note the following: • Talk alternately with the other party in a quiet room. • If you or the other party has difficulty hearing, press [d] to decrease the speaker volume. •...

  • Page 35

    To redial using the redial list (Memory Redial) The last 5 phone numbers dialed are stored in the redial list. 1. Press [REDIAL/PAUSE]. • The last number dialed is displayed. 2. Scroll to the desired number by pressing [d] or [B]. •...

  • Page 36

    Voice Enhancer Technology Panasonic’s Voice Enhancer Technology clarifies the voice of the person you are talking to, reproducing a more natural-sounding voice that is easier to hear and understand. Voice Enhancer Technology can be turned on or off. The factory preset is OFF.

  • Page 37: Using The Base Unit

    When the handset is not in use, you can also turn this feature on or off by performing the following steps: 1. Press [MENU] while the handset is not in use. 2. Scroll to “Voice enhancer” by pressing [d] or [B], then press the soft key SELECT 3.

  • Page 38

    Making Calls To redial the last number dialed Press [SP-PHONE] or a line button, then press [REDIAL/PAUSE]. To put a call on hold Press [HOLD] during a conversation. • The line button flashes. To return to the call, press the line button that is flashing. •...

  • Page 39: Answering Calls

    Ringer/Message Alert indicator on the handset and the line button on the base unit flash rapidly. 2 calls can be handled simultaneously on separate telephone lines by the handset and the base unit, or by 2 handsets (when the system has 2 or more handsets, p.

  • Page 40: During A Conversation

    Using the Other Line During a Conversation When a call is being received on the other line during a conversation, you will hear 2 tones. The line button will flash rapidly on the base unit. You can answer the second call while holding the first call. You can also make a call without terminating the first call.

  • Page 41: Caller Id Service

    Caller ID Service This unit is compatible with Caller ID services offered by your telephone company. If you subscribe to Caller ID, caller names and phone numbers will be displayed and recorded in the Caller List. How Caller ID information is displayed When a call comes in, the unit will ring and Caller ID information will be received.

  • Page 42: Using The Caller List, Viewing The Caller List

    Using the Caller List The unit can record information up to 50 different callers for both lines combined and store this information in the Caller List. Caller information is sorted by the most recent call to the oldest. When the 51 call is deleted.

  • Page 43: Caller List

    What “ ” and “ ” mean Indication of which line the caller information was received from. What “ ” means “Q” indicates you have already viewed this calling information or answered the call. If the same caller calls again, the call entry with the “Q” will be replaced with the new call entry.

  • Page 44: Number

    Area code H 1– • The order in which patterns F–H are displayed depends on how the telephone number is displayed in step 2. To call the edited number, press [C], [s], or a line soft key ( or ( LINE2 •...

  • Page 45: Caller Id Number Auto Edit

    Caller ID Number Auto Edit Once you call back an edited number (p. 44), this unit can automatically edit incoming phone numbers from the same area code in the Caller List and each time you receive a call. For example, it can ignore the area code of calls originating from your area code, so that you can call these numbers from the Caller List without dialing the area code.

  • Page 46: In The Phone Book, Erasing Caller Information

    Using the Caller List Storing Caller Information in the Phone Book Caller names and phone numbers that are in the Caller List can be stored in the phone book. Press [d] or [B] to enter the Caller List. Scroll to the desired caller by pressing [d] or [B]. Press the soft key ( •...

  • Page 47: Phone Book, Storing Names And Numbers

    • To store numbers for calling card access (see “Chain Dial” on page 50), we recommend you add pauses after each item. Storing pauses with numbers will prevent misdialing (p. 65). The delay time necessary will depend on your telephone company. For assistance, please call: 1-800-211-PANA(7262) Handset...

  • Page 48: Dialing From The Phone Book

    Phone Book Selecting characters to enter names Enter names using the dialing buttons. Press each button until the desired character is displayed. • Pressing each button selects a character in the order shown below. Keys Characters # & ’ ( ) ; , – . / 1 a b c A B C 2 d e f D E F 3 g h i G H I 4...

  • Page 49

    Items are sorted in the following order: Alphabet letters (Alphabetical) Space & ’ ( ) , – . / Numbers 0 to 9 Telephone numbers (If no name is stored) Press [C] or [s]. Press the soft key ( CALL LINE2 •...

  • Page 50: Chain Dial

    Phone Book Chain Dial Handset You can dial a combination of phone book or manual key pad entries while making a call. This feature can be used, for example, to first automatically dial a calling card access number that you have stored in the phone book, then manually or automatically dial your PIN and then automatically dial the destination number from the phone book.

  • Page 51

    Editing an Item in the Phone Book Press the soft key ( SEARCH Scroll to the desired item by pressing [d] or [B]. • To search for the item by initial, see page 49. Press the soft key ( EDIT Edit the name (p.

  • Page 52

    Phone Book Copying Items in the Phone Book (When the System Has 2 or More Handsets) You can copy 1 or all phone book items between 2 handsets. The destination handset will save the items in its phone book. • If an outside call is received during the phone book copy, copying will stop. You will need to re-send the item(s) later.

  • Page 53

    To copy all of the items in your phone book to another handset Make sure the destination handset is not in use. Press [MENU]. Scroll to “Copy phone book” by pressing [d] or [B], then press the soft key ( Scroll to “Copy all items”...

  • Page 54: Speed Dialer, Storing Phone Numbers, Number

    Speed Dialer Storing Phone Numbers You can store up to 10 phone numbers in the base unit. The dialing buttons ([0] to [9]) function as memory stations. Make sure the base unit is not being used. Press [PROGRAM]. • The IN USE indicator flashes and “ ” is displayed.

  • Page 55: Intercom, Making Intercom Calls

    Intercom Intercom calls can be made between a handset and the base unit, and between 2 handsets (when the system has 2 or more handsets, p. 3). You can page all handsets at once from the base unit, and announce the page to all handsets (Voice Paging, p.

  • Page 56: Answering Intercom Calls

    Intercom During an intercom call: • If you have difficulty hearing while using the speakerphone on the handset or base unit, decrease the speaker volume by pressing [d]. • If an incoming call is being received, you will hear 2 tones (incoming call tone, p.

  • Page 57: Voice Paging

    Voice Paging Base Unit The base unit user can make a voice announcement that is heard through the speakers of all handsets. • When 4 handsets are registered to the base unit, and if one handset user is on conversation using the Booster feature, one of the remaining 3 handsets will not receive the voice announcement.

  • Page 58: Transferring A Call

    Transferring a Call You can transfer an outside call to the base unit or a handset. From the Handset Handset: (1) During a call, press [HOLD/INTERCOM]. • “ ” or “ LINE1 put on hold. (2) To page the base unit, press [0]. (3) Wait for the paged party to answer, then you can announce the transfer.

  • Page 59

    From a Handset to another (when the system has 2 or more handsets) During a call, press [HOLD/INTERCOM], then page another handset by pressing its extension number ([1] to [4]). Wait for the paged party to answer, then you can announce the transfer.

  • Page 60

    Transferring a Call Quick call transfer You can transfer a call without waiting for the paged party to answer. Handset 1. During a call, press [HOLD/INTERCOM]. 2. Press the extension number ([0] for the base unit, [1] to [4] for the handset).

  • Page 61: Conference Calls

    Conference Calls Conference call with 2 outside calls While you are talking with an outside caller, you can make or answer a second call on the other line, and then combine the calls to establish a conference call. Handset During a call, press [HOLD/ INTERCOM] 2 times to put the first call on hold.

  • Page 62: Call Share

    Conference Calls Conference with an outside call and an intercom call While you are talking with an outside caller, another user can join the conversation using the handset or the base unit and establish a conference call. Handset During a call, press [HOLD/ INTERCOM].

  • Page 63: Room Monitor

    Room Monitor This feature allows you to monitor a room by using the intercom feature. For example, you can monitor a baby from different areas of the house. You can call the destination unit to monitor the room. The called unit will not ring. When the system has 2 or more handsets (p.

  • Page 64

    Room Monitor To monitor with The unit to be monitored must not be in use and the handset to be monitored must be off the base unit. Press [HOLD/INTERCOM], then press the soft key ( To call the base unit, press [0]. To call another handset, press its extension number ([1] to [4]).

  • Page 65: Special Features, Muting Your Conversation, Call Privacy

    Special Features Muting Your Conversation During a call, you can mute your phone so the other party cannot listen to you. When muting your conversation, you can hear the other party. Handset Press the soft key ( • “Mute” will be displayed for a few seconds and “ •...

  • Page 66: Users

    “Waiting” and the line. • Contact your telephone company for details about availability in your area, and to verify that CWID service is activated on your telephone line.

  • Page 67: Flash Button

    Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. • Pressing [FLASH/CALL WAIT] cancels the mute (p. 65) or the Temporary Tone Dialing mode (p.

  • Page 68: Incoming Call Tone

    Special Features Incoming Call Tone During an outside call, you can be informed of another incoming call on the other line. During an intercom call (p. 56) or while using the Room Monitor feature (p. 64), you can also be informed of incoming calls by 2 tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing.

  • Page 69: Line Selection

    Line Selection When you make or answer a call, the handset and base unit can automatically select the line when you press [C] or [s] on the handset or [SP-PHONE] on the base unit. There are 3 types of line selection. You can change the line selection for the handset and base unit separately.

  • Page 70: Key Tone

    Special Features Base unit line selection Press [MENU]. Scroll to “Initial setting” by pressing [d] or [B], then press the soft key ( Scroll to “Set base unit” by pressing [d] or [B], then press the soft key ( Scroll to “Line selection” by pressing [d] or [B], then press the soft key ( Select “Line1”, “Line2”...

  • Page 71: Operation, Calls

    Automatic Answering Operation The Answering System allows the unit to answer calls with a greeting message. Callers can then leave a message. When turning the Answering System on, you can select the lines it will answer calls from. • The total recording time of all messages (greeting, incoming and memo) is about 60 minutes (about 30 minutes in “Enhanced recording”...

  • Page 72: Monitoring Incoming Calls

    Automatic Answering Operation To turn off the Answering System Press [ANSWER ON]. • The indicator light goes out, and the unit announces “Answer off”. • To turn the Answering System off for one line when both lines are turned on, select the line which you want to leave on by pressing [LINE SELECT], then press [ANSWER ON].

  • Page 73: Listening To Messages, Using The Base Unit

    Listening to Messages Voice Day/Time Stamp: During playback, the unit will announce the day and time when each message was recorded (p. 20). The unit will indicate that new messages have been recorded in the following ways: — The NEW MESSAGE indicator flashes on the base unit. —...

  • Page 74

    Listening to Messages • If a call is received during playback, the unit rings and playback stops. To answer the call, press the called line button. For playback, start again from the beginning after hanging up. • If 65 or more new messages have been recorded, the unit will not announce the number of new messages during playback.

  • Page 75

    To play back messages for the desired line(s) 1. Press the soft key ( SEARCH 2. To listen to messages for LINE 1, press [#][1]. To listen to messages for LINE 2, press [#][2]. To listen to messages for LINE 1 and LINE 2, press [#][0]. •...

  • Page 76

    Listening to Messages For Caller ID service users (p. 41) During playback, the handset display shows the name and/or number of the caller whose message is being played. To call the displayed number: 1. Press the soft key ( • The unit stops playback. •...

  • Page 77: Erasing Messages

    Erasing Messages The unit will announce the remaining recording time after playback if it is less than 10 minutes. New messages cannot be recorded when: — “Memory full” is heard. — “ ” flashes on the base unit. FULL — ANSWER ON indicator flashes rapidly (when the Answering System is on). Erase unnecessary messages.

  • Page 78: Message

    Erasing Messages Handset Press the soft key ( Press [*][5] to erase all messages. Wait until “No messages” is heard. • While erasing messages, alarm tones will be heard. • All messages for the line(s) and memo messages are erased. •...

  • Page 79: Answering System, Remote Operation From A

    Transferring a Call to the Answering System Base Unit Handset When you answer a call and the caller wants to talk to someone who is not available, you can transfer the caller to the Answering System, where the caller can leave a message.

  • Page 80: Touch Tone Phone

    Remote Operation from a Touch Tone Phone While outside, you can operate the Answering System from any touch tone phone. A synthesized voice menu will guide you through the Answering System (p. 82). • To skip the voice menu and operate the unit directly, see page 83.

  • Page 81: Remote Code

    Remote Operation from a Touch Tone Phone Remote Code Handset The remote code prevents unauthorized people from accessing your unit and listening to your messages. Choose any 2-digit number (00–99) for your remote code. The factory preset remote code is “11”. If you do not program your own remote code, you can use “11”.

  • Page 82: Voice Menu

    Remote Operation from a Touch Tone Phone Voice Menu The shaded parts are voice prompts. Press 1 to play back all messages. Press 2 for other functions. Press [2]. Press 1 to play back new messages. Press 2 for other functions. Press [2].

  • Page 83: Direct Remote Operation, For Assistance, Please Call: 1-800-211-pana(7262

    • The Answering System will be turned on. Hang up or enter the remote code for other options. • When turning on the Answering System using a rotary or pulse service telephone, you cannot enter the remote code for other options.

  • Page 84: Wall Mounting

    This unit can be mounted on a wall phone plate. Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor (A). Connect the telephone line cord (B). Insert the hooks on the wall mounting adaptor into the holes ( ) on the base unit.

  • Page 85

    Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until it clicks into place. Connect the telephone line cord. Mount the unit, then slide it down. • Raise the antennas. To charge the handset battery: Place the handset on the base unit.

  • Page 86

    Wall Mounting To remove the wall mounting adaptor While pushing down the RELEASE LEVERS (A), remove the adaptor (B). RELEASE LEVERS Charger unit (KX-TG6502 only) The charger can be wall mounted. Connect the AC adaptor. Install screws using the wall template (see below). Mount the charger ( down to the right ( ) until it is secured.

  • Page 87: Belt Clip, Optional Headset

    To attach the belt clip Optional Headset Connecting an optional headset to the handset allows hands-free phone conversation. Please use only a Panasonic KX-TCA60, KX-TCA86, KX-TCA88, KX-TCA88HA, KX-TCA91, KX-TCA92, or KX-TCA98 headset. To order, call the accessories telephone number on page 2.

  • Page 88: Direct Commands

    Direct Commands Handset After pressing [MENU], you can also program menu items directly by pressing ([0] to [9], [*] and [#]) instead of using the soft keys. Menu item Ringer volume (Handset) Ringer tone (Handset) Incoming call tone (Handset) Message play Date and time Voice enhancer Copy phone book...

  • Page 89

    Menu item Recording mode Change language Room monitor (Handset) Message alert Ringer tone Line 1 [0] [*] [1] [1] [1]–[4] : Tone pattern 1–4 (Base unit) Line 2 [0] [*] [1] [2] Incoming call tone (Base unit) Room monitor (Base unit) Line selection (Base unit) Ringer volume...

  • Page 90: Re-registration, Registration, Re-registering The Handset

    Canceling Registration/Re-registration Canceling the Handset Registration If you no longer need to use the handset or if you want to use the handset with a different base unit of the same model, it is necessary to cancel the handset’s registration from the current base unit. Only one handset can be canceled at a time.

  • Page 91

    Canceling Registration/Re-registration If you have canceled handset registration at a previous base unit (p. 90), start from step 5. Handset: Press [MENU]. Handset: Scroll to “Initial setting” by pressing [d] or [B], then press the soft key SELECT Handset: Scroll to “Registration” by pressing [d] or [B], then press the soft key SELECT Handset: Press the soft key (...

  • Page 92: Your Display

    If the Following Appear on Your Display... The following will be displayed on the handset when the unit needs your attention. Display message Recharge battery Charge for 6 HRS No link to base. Move closer to base and try again. Please lift up and try again.

  • Page 93

    If the Following Appear on Your Display... Display message • When you tried to store an item in the phone book, Phone book full • When the displayed item was sent to the destination ---Incomplete--- Tom Jones 098-765-4321 Phone book full (The name/number is an example.) •...

  • Page 94: Troubleshooting

    • Raise the base unit antennas. • Turn on the Clarity Booster feature (p. 36). • If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations. We...

  • Page 95

    Problem You cannot program any function items. While programming or searching, the handset or base unit starts to ring and the program/search stops. You cannot make an intercom/ outside call. You cannot redial. You cannot make long distance calls. For assistance, please call: 1-800-211-PANA(7262) Troubleshooting Cause &...

  • Page 96

    Caller ID box or plug the unit directly into the wall jack. • If the unit is connected to a telephone line with DSL service, the unit may not display caller’s name and/or phone number properly. We...

  • Page 97

    Answering System Problem The Answering System is on, but incoming messages are not recorded. “ ” flashes and the FULL ANSWER ON indicator flashes rapidly. No new messages are recorded. You cannot operate the Answering System from the base unit or the handset. You cannot operate the Answering System from a touch tone phone.

  • Page 98

    • The battery may need to be replaced. If you install a new battery, fully charge it (p. 16, 17). ” are • This is normal. • Visit our website: http://www.panasonic.com/support • Contact us via the web at: http://www.panasonic.com/contactinfo • Call our customer call center at: 1-800-211-PANA(7262) Cause &...

  • Page 99: Instructions

    Important Safety Instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fire, electric shock, or personal injury. 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on this unit. 3.

  • Page 100: Fcc And Other Information

    Registration No..(found on the bottom of the unit) Ringer Equivalence No. (REN)...0.2B A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA.

  • Page 101

    FCC and Other Information If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible.

  • Page 102

    • If there is any trouble — disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone...

  • Page 103: Index

    Installation, AC adaptor ..12 Installation, battery... . . 16 Installation, telephone line cord ....13, 14 Intercom call .

  • Page 104: Warranty

    System ..... 97 Troubleshooting, general ..98 Troubleshooting, Telephone System ..... 94 TTY .

  • Page 107: Specifications

    AC adaptor (120 V AC, 60 Hz) Standby: Approx. 0.8 W Maximum: Approx. 4.0 W " x 2 Approx. 120 g (0.26 lb.) Tone (DTMF)/Pulse Participant, Panasonic has NERGY NERGY TAR is a " x 1 ") " x 5 ") "...

  • Page 108

    Symptom • Send the unit to an authorized servicenter, prepaid and adequately insured. • Do not send your unit to the Panasonic Consumer Electronics Company listed below or to executive or regional sales offices. These locations do not repair consumer products.

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: