Table of Contents
Advertisement
TG6500C_CordlessTel2.fm Page 60 Thursday, September 30, 2004 4:56 PM
Transferring a Call
From a
Handset
(when the system has 2 or more handsets)
1
During a call, press [HOLD/INTERCOM],
then page another handset by pressing its
extension number ([1] to [4]).
2
Wait for the paged party to answer, then you can announce the
transfer.
• The paged handset user can answer by pressing [C], [s] or
[HOLD/INTERCOM]. (Any button except [d], [B] or [OFF] can be pressed
to answer the page.)
• If the paged party does not answer, press the line soft key (
(
) that is flashing to return to the outside call.
LINE2
3
To complete the transfer, press [OFF].
• If the Auto Talk feature is turned on (p. 25), the paged handset user can also
answer a page by simply lifting the handset off the base unit (or the charger, for
accessory handset users, p. 3).
• Any user can answer a transferred call:
— for the handset, press the line soft key (
— for the base unit, press the line button.
• If you call an extension in step 1, and the extension is in use, the handset display
will show "Busy" then "Hold", or busy tones will be heard from the base unit.
Press the line soft key (
flashing to return to the outside call.
To transfer the call to another extension, repeat from step 1.
OR
To transfer the call to the Answering System to allow the caller to leave a
message, perform the following steps:
(1) Press [HOLD/INTERCOM] on the handset or [LOCATOR/INTERCOM/
TRANSFER] on the base unit.
(2) Press [9] to transfer the caller to the Answering System greeting (p. 80).
(The caller will hear the greeting and can leave a message after the beep.)
60
to another
Handset
LINE1
) or (
) that is flashing or the line button that is
LINE1
LINE2
e.g. LINE 1 on hold.
Press extension#
to transfer
1-4=Handset
0=Base 9=Mailbox
LINE1
LINE2
) or
LINE1
) or (
).
LINE2
Advertisement
Table of Contents
