Ringer Volume - Panasonic KX-TC1485LAB Operating Instructions Manual

PQQX ZA-2 02.6.18 2:43 PM ページ 9
Battery information
After your Panasonic battery is fully charged (p. 8):
Operation
While in use (TALK)
While not in use (Standby)
≥The battery operating time may be shortened depending on usage conditions,
such as viewing the Caller ID Caller List or phonebook, and ambient
temperature.
≥Clean the handset and the base unit charge contacts with a soft, dry cloth
once a month. Clean more often if the unit is subject to grease, dust or
high humidity. Otherwise the battery may not charge properly.
≥If the battery is fully charged, you do not have to place the handset on the base
unit until "RECHARGE" and "
≥The battery cannot be overcharged.
Standby Mode (
The handset goes into the standby mode after you finish using the
handset (making/answering a call, viewing the Caller List or phonebook
etc.). The display shows "STANDBY".
The battery operating time is conserved in this mode.

Ringer Volume

Set the RINGER selector to ON or OFF.
≥When set to OFF, the unit will not ring.
For assistance, please call: 1-800-211-PANA(7262)
" are displayed. This will maximize the battery life.
While the handset is off the base unit)
Operating time
Up to about 5 hours
Up to about 5 days
9