Create Conference By Barging Call On Shared Line; Meet Me Conference; Start Meet Me Conference - Cisco 7961G User Manual

Calling Features

Create Conference by Barging Call on Shared Line

Procedure
Step 1
Press the line button for the shared line.
Step 2 In some cases, you must highlight the call and press cBarge to complete the action.
If you see the message that you cannot be added, try again.

Meet Me Conference

Meet Me conferencing allows you to start or join a conference by calling the conference number.
Tips
• If you call a secure Meet Me conference number from a non-secure phone, your phone displays the
• A Meet Me conference ends when all participants hang up.
• If the conference initiator disconnects, the conference call continues until all participants hang up.

Start Meet Me Conference

Participants cannot join the conference until the initiator starts the conference.
Procedure
Step 1 Obtain a Meet Me phone number from your system administrator.
Step 2 Distribute the number to participants.
Step 3
When you are ready to start the meeting, go off-hook to get a dial tone, then press MeetMe.
Step 4 Dial the Meet Me conference number.
Participants can now join the conference by dialing the Meet Me number.
message Device Not Authorized. For more information, see
Cisco Unified IP Phone 7941G, 7941G-GE, 7942G, 7961G, 7961G-GE, and 7962 User Guide for Cisco Unified
Meet Me Conference
Secure Calls, on page
Communications Manager 9.0 (SCCP and SIP)
51.
39