Table of Contents
Advertisement
Press
to confirm.
2.
Setting the time format
Requirement: The display shows the possible formats
24h and AM/PM. 24h is preset.
Use the rotary selector to set the required format.
1.
Press
to confirm.
2.
Set the time
Requirement: The display shows the time.
Use the rotary selector to set the required time.
1.
Press
to confirm.
2.
Setting the date format
Requirement: The display shows the possible formats
D.M.Y, D/M/Y and M/D/Y. D.M.Y is preset.
Use the rotary selector to set the required format.
1.
Press
to confirm.
2.
Setting the date
Requirement: The display shows the preset date. The
daily setting is already active.
Use the rotary selector to set the required day.
1.
Press to switch to the month setting.
2.
Use the rotary selector to set the month.
3.
Press to switch to the year setting.
4.
Turn the rotary selector to set the year.
5.
Press
to confirm.
6.
Setting the temperature unit
Requirement: The display shows the possible units °C
and °F. The unit °C is preset.
Turn the rotary selector to set the required unit.
1.
Press
to confirm.
2.
7 Basic operation
7.1 Activating the appliance
To exit standby mode, open the door and turn the
1.
function selector or touch a touch field.
Set the required function.
2.
7.2 Opening the appliance door
Always open the appliance door as far as it will go.
▶
In this position the appliance door does not swing
back.
7.3 Switching on the appliance
Use the function selector to set the required type of
1.
heating.
a The display shows the selected type of heating and
the suggested temperature.
If required, use the rotary selector to set the desired
2.
temperature.
a The display shows the heating symbol
a The bar displays the current heating status.
a Once the appliance reaches the set temperature, a
signal tone sounds and the heating symbol goes
out
.
Fitting the grease filter
Hook the enclosed grease filter → Page 7 onto the
▶
two bolts on the back wall of the cooking compart-
ment.
‒
Ending the initial use
Requirement: The display shows "Initial set-up com-
plete".
Press
▶
a The appliance switches to standby mode.
a The display shows the standby screen.
a The appliance is ready to use.
Cleaning the door pane
Note: To ensure tightness, the door seal is lubricated
at the factory. Residue may remain on the door pane.
Before using for the first time, clean the door pane
▶
with glass cleaner and a window cloth or a mi-
crofibre cloth.
Do not use a glass scraper.
Cleaning accessories
Before first use, clean the accessories thoroughly
▶
using hot soapy water and a soft cloth.
Heating up the appliance
Ensure that there is no leftover packaging in the
1.
cooking compartment.
Remove any accessories from the cooking compart-
2.
ment.
To eliminate the new-appliance smell, heat up the
3.
empty appliance with the door closed.
The ideal setting for heating is and 200 °C for
one hour.
Note: If you select a different type of heating, the tem-
perature that has been set is retained.
The display only shows the suggested temperature
once the appliance has been switched on.
7.4 Switching off the appliance
Turn the function selector to .
▶
Depending on the type of heating, you may hear an
automatic rinse cycle running.
7.5 Steam injection
During steam injection, the appliance injects steam into
the cooking compartment. This enables you to bake
food such as bread and bread rolls with sufficient mois-
ture. It also gives yeast-risen baked goods a smooth,
shiny crust.
Steam injection only works with the following types of
heating:
.
¡ Hot air + 30% humidity
¡ Hot air + 0% humidity
¡ Full surface grill + air recirculation
Do not scratch the back wall of the cooking com-
partment.
.
Basic operation en
13
Advertisement
Table of Contents
